Audiovox FRS1000 Owners Manual - Page 20
Troubleshooting Cont.
UPC - 044476082191
View all Audiovox FRS1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting (Cont.) Problem Weak or no signal received Unit beeps, but will not function when turned on Reception of unwanted signals Charge light flashes Possible cause Weak batteries Channel and privacy code not set the same as target transceiver transceiver Volume level too low PTT Button inadvertently depressed Excessive radio interference on a particular channel Obstruction of radio signal Batteries extremely discharged Correction Charge or replace batteries Adjust the transceiver's settings to match those settings of the target Increase volume level Release PTT Button Change to a different channel Avoid operating in or near large buildings or vehicles Charge or replace batteries CTCSS privacy mode not on Interference from electronic devices such as computers or TVs Batteries are not installed and CHARGE switch (1) is on Turn on the CTCSS privacy mode and set code number to match the setting of the target transceiver. Turn the devices off or move farther away from them. Install Audiovox approved batteries 20