Audiovox LCM45NB Installation Manual - Page 4
Maintenance - lcd
UPC - 044476029561
View all Audiovox LCM45NB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Maintenance Though your monitor requires little care, you can still maintain its condition and performance by following the procedures below. • Keep your system away from excessive moisture, extreme heat or cold, and magnetic fields. • Keep liquids away from the display. • To avoid damage, do not place external devices or other objects on the top of the monitor. • Occasionally wipe the monitor with a soft, damp cloth. 3. Installing the Control box: • Monitor: Connect the 8-pin female monitor extension cable connector to the monitor 8-pin male cable connector. Route the monitor extension cable to the under dash area. Connect the 8-pin male monitor extension cable connector to the control box 8-pin female connector. Secure the control box. • Power harness: Connect the power 4-pin connector to the control box 4-pin connector. Attach the 4 wires in the harness as listed below. 4. Electrical Connections: Attach the 4 wires to the appropriate power source as listed below. a) Red wire - 12 volt constant (positive) b) Black wire - Chassis ground (negative) c) Blue wire - 12-volt ignition (12 volt with ignition on) d) Green wire - Reverse light (12 volt when vehicle is in the reverse gear) WARNING: Observe polarity when connecting the wires. Control BOX To Control BOX Cam Button Selector Switch To Rearview Camera To Interior Camera To LCD monitor To Filter BOX Filter BOX Red (+12V) Blue (Ignition) Black (GND) Green (Reverse) Figure 2. System Connections 6 3