Audiovox NVX225 User Manual - Page 62
Speeding tolerance, Alternative speed limit, Alternative speeding tolerance
UPC - 689076576284
View all Audiovox NVX225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
fully correct for all roads in the map. This setting lets you decide whether you want to receive the warnings or not. If you turn on this switch, The NVX225 Navigator will open a new screen to let you customize the parameters used by the speed warning. You can set two different kinds of behavior for the warning: one is applied up to a certain speed limit and the other one is used above that. 5.1.4.1 Speeding tolerance The NVX225 Navigator will warn you when you exceed the speed limit by the amount specified here. Select whether you want to specify the tolerance as a fixed value (offset to the speed limit) or as a Percentage. The slider will change depending on which mode you have chosen. Both positive and negative values can be given in either offset or percentage mode. 5.1.4.2 Alternative speed limit If the speed limit of the current road segment equals or is above this limit, the speed warning will use the alternative tolerance instead of the previous one. Move the slider to its rightmost position to turn off the alternative speed warning. Then the settings of the upper slider will determine the warning for all roads. 5.1.4.3 Alternative speeding tolerance If the speed limit of the current road reaches the value set at Alternative speed limit, this setting will replace the basic one set at the top of this screen. The slider and the selector work exactly as the basic ones described in 5.1.4.1. Example: to let you better understand how this feature works, here is an example. If you use the setting on the left (portrait) screen example (+10 km/h - 100 km/h - +5%), The NVX225 Navigator will warn you when driving at the following speeds: Speed limit Warning at 62