Audiovox PW101 User Guide - Page 1

Power Conditioner with Surge Suppression USER GUIDE for PW100/101 Connecting Equipment To Your Acoustic Research Power Conditioner with Surge Suppression Power Connections 1. Plug the power conditioner into a grounded outlet. 2. Plug all connected equipment directly into the power conditioner. Note: Power plugs can be heavy and may cause the conditioner to tip backwards slightly. If this happens, pull out the extending arm on the left size of the conditioner's back panel. This arm stabilizes the unit. 3. Turn on the power conditioner. The LED will illuminate when the unit is powered on. Your power conditioner provides maximum surge protection even if the power switch is in the off position. 1 GROUNDED OUTLET 2 2 TV 2 VCR 2 2 DVD RECEIVER AUDIO EQUIPMENT CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters. This power conditioner is designed for indoor use only. Install the power conditioner away from heat emitting appliances such as radiators or heat registers. Do not install where excessive moisture is present. Do not plug extension cords into the power conditioner. Never install electrical or telephone wiring during a lightning storm. DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES. DO NOT USE IN DAMP AREAS OR NEAR WATER RELATED APPLICATIONS SUCH AS AQUARIUMS, HOT TUBS, ETC.