Audiovox SIR-ALP10T Installation Guide - Page 9
Dark Blue Ai-NET Connectors are Audio Output. Exception is the connector on an Alpine - nve n872a
UPC - 084720001110
View all Audiovox SIR-ALP10T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Right-angle SMB Connector Antenna (21' cable) Mount on Roof of Vehicle Note: Connect the RED (ACC/IGN) wire ONLY when using the SIR-ALP10T without an Alpine headunit. DATA Red (Pin 1) - ACC, Connect to Ignition Switched Circuit Ignition Switch Yellow (Pin 2) - Connect to Battery Positive (+) Black (Pin 3) - Connect to Chassis Ground (-) 3.5-meter Data Cable (Connect to Alpine NVE-N872A) 2.5-meter Ai-NET Cable (Connect to Alpine SAT Ready Headunit or Signal Processor) Note: It is important to follow the Input/Output configuration of the Ai-NET system. The directionality is in reference to the Audio Path. Gray Ai-NET connectors are Audio Input Dark Blue Ai-NET Connectors are Audio Output. (Exception is the connector on an Alpine Headunit - it can be either Input or Output depending on the position of the Ai-NET switch on the bottom of the unit. SIR-ALP10T OInpsetaralltaitoionnanGduiIdnestallation Guide 99