Audiovox VM9311 Instruction Manual - Page 20

14

VM9311

Adjusting the Clock

Method 1 – TFT screen open:

1.

Access the “Clock” setting under the General Setup

menu.

2.

Press the

>>

or

<<

buttons (14, 22) on the remote

control or the

/\

or

V

buttons (18, 19) on the joystick to

move the cursor to the “Hour” or “Min” position.

3.

Press the

|<<

, or

>>|

buttons (17, 19) on the remote

control or the

<

or

>

buttons (16, 17) on the joystick to

adjust the hour or minutes.

4.

Press the

<<

button (14) on the remote control to confirm

setup.

Method 2 – TFT screen closed:

1.

Press and hold the

DISP

button (5) until the clock

flashes in the LCD display.

1.

Press the

/\

or

V

buttons (18, 19) on the joystick to move

the cursor to the “Hour” or “Min” position.

2.

Press the

<

or

>

buttons (16, 17) on the joystick to adjust

the hour or minutes.

3.

Press the

DISP

button (5) on the unit to confirm setup.

Returning to the System Setup Menu

To return to the System Setup menu, move to

, then

press the

>/||

button on the remote control.

ASP (Audio Sound Processing) Config

Menu

The ASP Config Menu allows you to make fine audio

adjustments.

Accessing the ASP Config Menu

To access the “ASP CONFIG” Menu, press the direction

buttons on the joystick (16, 17, 18, 19) or remote control (14,

17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press

the

>/||

button (18) on the remote control to enter the “ASP

CONFIG” menu. A menu appears with the option for the first

item, “Bass Center Freq”, highlighted in light blue.

Adjusting a Feature

1.

Enter the option field for the feature you want to adjust

by pressing the

>/||

button (18) on the remote or by

pressing the

ENTER

(joystick) button (20) on the unit. A

submenu appears in a second row with the selected

option highlighted in light blue.

2.

Select a new value by pressing the

>>

or

<<

buttons (14,

22) on the remote control or the

/\

or

V

buttons (18, 19)

on the joystick.

3.

Confirm your selection by pressing the

<<

,

|<<

, or

>>|

buttons (14, 17, 19) on the remote control, or the

<

or

>

button (16, 17) on the joystick. The new value is

highlighted in light blue and setup is complete.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the

SYS SETUP

button (31) on the remote control or the

DISP

button (5) on the front panel.

Table 6: ASP Config Menu Features

Setting

Options

Function

Bass Center

Freq

60Hz

According to the audio source, select

the Bass Center Frequency to

achieve the best Bass effect.

80Hz

100Hz

130Hz

150Hz

200Hz

Treble Center

Freq

10KHz

According to the audio source, select

the Treble Center Frequency to

achieve the best Treble effect.

12.5KHz

15KHz

17KHz

Sub Filter

80Hz

Selecting a crossover frequency sets

a cut-off frequency of the subwoofer's

LPF (low-pass filter) and the

“SMALL” speakers' HPF (high-pass

filter). The Crossover frequency set-

ting has no effect if the subwoofer is

set to “OFF” and any other speaker is

set to “LARGE”.

120Hz

160Hz

Sub Phase

0D

Subwoofer output IN phase

180D

Subwoofer output OUT OF phase

NOTE: Depending on your installa-

tion, reversing the subwoofer phase

may increase Bass output.

Bass Q-Factor

1.0

When the Bass Center Frequency is

selected, adjusting the Bass Q-Fac-

tor alters the sharpness of the Bass

output.

1.25

1.5

2.0

Return to previous menu.

Table 6: ASP Config Menu Features

Setting

Options

Function

Audiovox VM9311 Instruction Manual - Page 20

ASP Audio Sound Processing Config, Exiting the System Setup Menu

Page 20 highlights