Audiovox XPMP3H1 User Guide - Page 23
Dock Your XMp3i - battery
![]() |
View all Audiovox XPMP3H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
To Connect the Home Dock to Your Powered Speakers The Home Dock can be connected directly to a pair of speakers. The speakers will need to be powered for amplification. 1 Connect the 1/8" (3.5 mm) connector from the powered speakers to the green AUDIO connector at the rear of the Home Dock. 2 Plug the AC Power Adapter for the speakers into an AC outlet. 3 Turn the speakers On. Dock Your XMp3i Place the XMp3i into the Home Dock as shown, and turn it On by sliding the Power/Lock switch down. IMPORTANT! Allow the XMp3i to charge the battery for a minimum of three hours before removing from the Home Dock. 23
![](/manual_guide/products/audiovox-xpmp3h1-user-guide-f4a6a14/23.png)
23
To Connect the Home Dock to Your Powered Speakers
The Home Dock can be connected directly to a pair of speakers° The speakers
will need to be powered for amplification°
1
Connect the 1/8” (3°5 mm) connector from the powered speakers
to the
green AUDIO
connector at the rear of the Home Dock°
2
Plug the AC Power Adapter for the speakers into an
AC outlet°
3
Turn the speakers On°
Dock Your XMp3i
Place the XMp3i into the Home Dock as shown, and turn it On
by sliding the
Power/Lock
switch down°
IMPORTANT!
Allow the XMp3i to charge the battery for a
minimum of three hours before removing from the Home Dock°