Avanti DER24P3S Instruction Guide - Page 18

Ø HOW TO USE THE OVEN The oven is controlled by two separate knobs, the Broil / Oven Control Knob is used to select the mode of operation used for cooking and the Oven Temperature Knob which is used to set the desired cooking temperature. When the Broil / Oven Control knob is in the or "standby" position, the heating elements will not operate. You must first select the appropriate cooking mode (Broil or Oven/Bake) and then select the desired temperature as described in the instructions below. Model(s): DER20P3S DER24P3S DER20P3S DER24P3S DER24P3S ONLY DER24P3S ONLY DER24P3S ONLY Function Mode Function / Mode Description Standard Conventional Baking (Lower element will cycle on and off to maintain the selected temperature). Standard Conventional Broiling (Upper element will cycle on and off to maintain the selected temperature). Convection Fan Baking (Lower element will cycle on and off with the convection fan to circulate the air in the oven maintain the selected temperature). Convection Fan Broiling (Upper element will cycle on and off with the convection fan to circulate the air in the oven maintain the selected temperature). Rotisserie (Upper element and convection fan will cycle on and off to maintain the selected temperature while the meat is rotated by the rotisserie motor to roast the meat). USING THE OVEN Turn the Broil/Oven Control knob to select the desired function / mode as described above. Turn the Oven Temperature Knob clockwise to select the desired temperature up to 500° F. To switch off the oven turn the thermostat control to the "standby" position. You can use your range for Bake and Broil. For that reason, the oven has two different heating elements which are: - Bake element 2100W (Lower heating element) - Broil element 2000W (Upper heating element) CAUTION: The oven door becomes very hot during operation. Keep children well out of reach. WARNING: The door is hot, use the handle WARNING: After use, turn the Oven Function Control and Oven Temperature • Control knobs to the STANDBY position to turn the oven off. OVEN THERMOSTAT Rotate clockwise until the required temperature is reached [From (Standby) to MAX (550ºF)]. USING THE BROILER In this setting only the upper element is switched distributed by radiation. . Heat is In order to broil, use the following steps: 1. Place the meat on the broil grid in broiler pan. Always use the grid so that the fat drips into the broiler pan, otherwise the juices may catch on fire. Do not broil without using the broiler pan. 2. Position the broiler pan on the second level from the top. 3. Turn the knob OvenBroil/Oven Control Knob to 4. Turn the knob Oven Temperature Knob clockwise to select the desired temperature up to 550° F. 5. To switch off the oven turn the thermostat control and function control knobs to the position. 18 "standby"