Avanti ER2002CSS Instruction Manual - Page 18

OVEN THERMOSTAT This only sets the cooking temperature and does not switch the oven on. Rotate clockwise until the required temperature is reached (From WARM to 450°F). The power indicator light signals when the heat elements are switched or switched . Temperature Setting Table Knob Setting Temperature in °F Temperature in °C WARM 150 65 200 200 93 250 250 121 300 300 149 350 350 177 400 400 204 450 450 232 FUNCTION SELECTOR KNOB Rotate the knob clockwise to set the oven for one of the following functions. Oven Light The oven is equipped with a light that illuminates the oven to enable visually controlling the food that is cooking. By turning the knob onto the setting you light the oven cavity. The oven remains lighted while any of function is . Bake In this setting only the hidden lower element is switched . Heat is distributed by natural convection. The thermostat can be set from WARM to 450°F. During the operating, the oven indicator light is turned . During operation the oven indicator light is always . In order to bake, use the following steps: 1. Place the rack in the correct position, before turn the oven . 2. Turn the function selector knob to the Bake position. 3. Turn the thermostat control knob to the desired temperature. 4. The bottom heat element will cycle and to maintain the selected temperature. Check food for doneness at minimum time on recipe. Cook longer if necessary. 5. When baking is completed, turn the function selector knob and thermostat control knob to the position, open door fully and remove the food. For best cooking results, always remember that hot air must circulate around the pans in the oven so that even heat reaches all parts of the oven. Therefore, place the pans in the center of oven and allow at least 2" space between pan and the surface of cavity. 18