Avanti IM4520G-IS Instruction Manual - Page 10

Care And Maintenance

Get Avanti IM4520G-IS PDF manuals and user guides View all Avanti IM4520G-IS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

· For best performance, water temperature should be between 7°C (45ºF) and 35°C (95ºF) and ambient between 15°C (59ºF) and 25°C (77ºF). · Actual ice making capacity will depend on the ambient temperature of the surroundings of the ice maker as well as the temperature and quality of the water used to make the ice. Getting Ice from the Ice-bin · Open the top cover to access the ice basket. · Remove the amount of ice as desired and close the top. CARE AND MAINTENANCE Caution Failure to unplug the ice maker could result in electrical shock or personal injury. Ø Cleaning Your Ice Maker · To ensure the cleanliness of the ice cubes, it is recommended that you use filtered water. · Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not be used for long period of time. Put the drain plug back in place after the water has been drained. · Always change with fresh water before starting ice production at initial installation or after long shut-off periods. · Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting. Ø Space Requirements · During transportation, the incline angle of the cabinet should not be over 45° · Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed system. · The Ice maker should be placed horizontally on a properly leveled surface. · To ensure proper ventilation for your Ice maker allow 6" of space at the top, the back and on each side. · Before using the Ice maker for the first time, please wait 2 hours after positioning it. · Clean the inner liner, ice-bin, and water box. IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source. Ø Power Failure Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a longer period of time, you need to take the proper steps to disconnect your appliance. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
10
•
For best performance, water temperature should be between 7°C (45ºF) and 35°C (95ºF)
and ambient between 15°C (59ºF) and 25°C (77ºF).
•
Actual ice making capacity will depend on the ambient temperature of the surroundings of
the ice maker as well as the temperature and quality of the water used to make the ice.
Getting Ice from the Ice-bin
•
Open the top cover to access the ice basket.
•
Remove the amount of ice as desired and close the top.
CARE AND MAINTENANCE
Caution
Failure to unplug the ice maker could result in electrical shock or personal injury.
°
Cleaning Your Ice Maker
•
To ensure the cleanliness of the ice cubes, it is recommended that you use filtered water.
•
Remove the drain plug to drain remaining water from the water reservoir when the ice maker will
not be used for long period of time. Put the drain plug back in place after the water has been
drained.
•
Always change with fresh water before starting ice production at initial installation or after long
shut-off periods.
•
Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice
cubes. Use a diluted solution of water and vinegar to clean the inside and the outside surface of
the Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline
or oil. Rinse thoroughly before starting.
°
Space Requirements
•
During transportation, the incline angle of the cabinet should not be over 45°
•
Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed
system.
•
The Ice maker should be placed horizontally on a properly leveled surface.
•
To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on
each side.
•
Before using the Ice maker for the first time, please wait 2 hours after positioning it.
•
Clean the inner liner, ice-bin, and water box.
IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.
°
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
ice maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF
for a longer period of time, you need to take the proper steps to disconnect your appliance.