Avanti IM4520G-IS Instruction Manual - Page 9
Operating Your Ice Maker, Warning
View all Avanti IM4520G-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATING YOUR ICE MAKER Ø Control Panel Description LED INDICATORS POWER INDICATOR The indicator above the word POWER will illuminate when the unit is plugged in. It will be illuminated in RED when the unit is turned on. ADD WATER INDICATOR The ice maker automatically checks the water level in the tank. If the water level is too low, the indicator will illuminate in AMBER and will stop working automatically. Press the ON/OFF button, add water to the unit and push the ON/OFF button again the indicator will turn off and will resume normal operation. ICE FULL INDICATOR When the ice-bin is full, the indicator will illuminate in AMBER. The indicator will remain lit until the ice in the bin either melts away slowly or has been removed. The unit will stay in a "Standby" mode until ice has been removed / melted at which time the unit will automatically start operation as normal. MAKING ICE When the system in the process of an ice making cycle, the light will illuminate in BLUE during the ice making process. ICE JAM If the ice cube shovel that moves the ice from the freezing area to the storage basket becomes jammed with an ice cube, the ICE JAM light will illuminate in RED and will shut the ice making system and cooling system down for approximately 10 minutes to allow the cube to melt. After approximately 10 minutes the light will turn off and the system will return to working as normal. Operating Instructions Starting your Ice maker · Open the top cover and remove the ice basket. · Remove any dust or objects that may be in the water tank · Fill the water tank up to the area marked "MAX". · The ice-maker will automatically check the water level in the reservoir periodically. The ice maker will detect any shortage of water and will stop the ice-making cycle, and then the ADD WATER indicator will be lit. · Press the ON/OFF button and fill the reservoir with water, press the ON/OFF button again to restart the ice-making cycle and the ADD WATER indicator goes out as the ice-maker will begin its normal operation cycle automatically. · When the ice cubes are collected and reach the bin sensor, the ice maker will stop operating and the ICE FULL indicator will be lit. · WARNING: Direct sunlight may affect the infrared sensors and cause the unit to malfunction. If at any time the unit does not stop the ice-making operation even when the ice-bin is full, move the unit to another location where it is out of direct sunlight. 9