Behringer BRAINS Quick Start Guide - Page 5
Display, Bank Button, Timbre Knob, Harmonics Knob, Timbre Cv Level, Timbre Cv, Out 1, Model Jack, - firmware update
View all Behringer BRAINS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
8 BRAINS BRAINS (EN) Controls (1) (2) (3) (10) (11) (4) (12) (5) (13) (6) (14) (7) (15) (8) (16) (9) (17) (18) (19) (20) (21) (22) Quick Start Guide 9 (1) DISPLAY - Produces a waveform of the audio content for quick visual feedback. (2) USB - Connect a standard USB cable for firmware updates. (3) BANK button - Toggles between Bank A and Bank B models. (4) TIMBRE knob - Function varies depending on the model selected, but generally sweeps from darker to brighter content. (5) HARMONICS knob - Function varies depending on the model selected, but generally adjusts frequency spread or tonal balance. (6) TIMBRE CV LEVEL - Attenuates the voltage received at the Timbre CV input. If the CV input is not patched, and a signal is received at the Trig input, this knob will instead control the amount of modulation from the internal envelope generator. (7) TIMBRE CV - Control the Timbre parameter via external control voltage. (8) OUT 1 - Sends the main processed signal via 3.5 mm TS cable. (9) MODEL jack - Allows model selection to be made remotely via external control voltage. (10) MODEL button - Scrolls through the available models in the currently-active bank. (11) MODEL LEDs - Indicate the current model via red LED for bank A or green LED for bank B. (12) MORPH knob - Function varies depending on the model selected, but generally controls the panning or character.