Behringer MIDI FOOT CONTROLLER FCB1010 Manual - Page 6

6 MIDI FOOT CONTROLLER FCB1010 User Manual 2.1.1 DIRECT SELECT deactivated Let's assume you wish to select PRESET #1 from BANK #3... Step 1 Use the UP/DOWN switches to go to the BANK that contains the PRESET of your choice (here: BANK #3). Step 2 Select the PRESET you wish to use (here: PRESET #1). As this example shows, the DIRECT SELECT feature gives you a faster access to BANKS and PRESETS than without this function. Which option to use is entirely up to you. As long as you need the PRESETS from one BANK only, it will be advisable to disable the DIRECT SELECT function because this way you can recall a new preset with only one keystroke. 2.2 GLOBAL CONFIGURATION In the GLOBAL CONFIGURATION menu you can set the parameters that apply to both the PRESETS and FUNCTIONS of your FCB1010 (e.g. MIDI channel selection, SysEx SEND & RCV, DIRECT SELECT etc.). Keep the DOWN switch pressed during power-up for about 2.5 sec to enter GLOBAL CONFIGURATION mode. The DIRECT SELECT LED in the display lights up. You can use the UP and DOWN keys to navigate through GLOBAL CONFIGURATION main pages. Pressing UP leafs through the pages forward, pressing DOWN leafs the pages backward. A corresponding LED indicates what page you are on. Step 2 Fig. 2.1: PRESET selection with DIRECT SELECT disabled Step 1 CONFIG. DOWN SELECT MIDI FUNCTION UP SELECT MIDI CHANNEL UP DOWN DOWN DIRECT SELECT 2.1.2 DIRECT SELECT activated If DIRECT SELECT is on, do as follows to select PRESET #1 from BANK #3 (activating DIRECT SELECT is discussed in ch. 2.2.1): Step 1 Select the BANK of your choice (here: BANK #3) by stepping on footswitch #3. Step 2 Select the PRESET you wish to use (here: PRESET #1) by stepping on footswitch #1. The display shows that preset 31 is selected. GLOBAL CONFIGURATION Fig. 2.3: GLOBAL CONFIGURATION menu structure To leave GLOBAL CONFIGURATION menu, you need to press the DOWN/ESCAPE key for at least 2.5 sec. ◊ Only keeping the DOWN/ESCAPE key pressed for at least 2.5 sec. saves your newly entered settings! 2.2.1 DIRECT SELECT page Keep the DOWN/ESCAPE key pressed while you power up the unit. This takes you to the GLOBAL CONFIGURATION menu; the green DIRECT SELECT LED lights up. To activate DIRECT SELECT, press 10/0 key. The red LED lights up. Now, you have to confirm activating DIRECT SELECT to be able to directly select presets. To do this, keep DOWN/ESCAPE pressed for 2.5 sec. to exit GLOBAL CONFIGURATION. The display now shows "00". Now you can directly select the presets, as described in ch. 2.1.2. Step 2 Step 1 Fig. 2.2: PRESET selection with DIRECT SELECT enabled