Behringer PMP1680S Manual - Page 10

Wiring Examples

Get Behringer PMP1680S PDF manuals and user guides View all Behringer PMP1680S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

10 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual 5. Wiring Examples For stereo operation the POWER AMP switch (28) of the PMP980S/PMP1680S must be set to its upper position (MAIN L/MAIN R). Outputs A and B deliver the stereo main signal to the P.A. speakers. Two active speakers, wired in parallel, are connected to the preamp monitor output. They are used as on-stage monitor speakers. The effects processors can be switched on and off with a dual footswitch. This set-up is not possible with the PMP960M (no stereo operation possible). Both the PMP980S/PMP1680S and the PMP960M can be set-up for dual mono operations. The POWER AMP switch (28) must be set to its lower (PMP960M) or center position (PMP980S/PMP1680S). The two loudspeaker outputs provide the main and monitor signals independently of each other and to two loudspeakers each, which are wired in parallel. PMP1680S 2 x BEHRINGER EUROLIVE Stack (B1800X & B1220, both passive) Loudspeaker (F.O.H. mix) Dual footswitch PMP1680S Front Panel (excerpt) 2 x BEHRINGER B215A (active) Loudspeaker connection (monitor mix) Fig. 5.1: EUROPOWER mixer as a stereo amplifier (example) PMP960M Rear Panel (excerpt) 2 x BEHRINGER EUROLIVE B1520 (passive) 2 x BEHRINGER EUROLIVE F1520 (passive) Loudspeaker connection for F.O.H and monitor mix (mono) Fig. 5.2: EUROPOWER as a dual mono amplifier (example)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
10
EUROPOWER PMP1680S/PMP980S/PMP960M User Manual
5.
Wiring Examples
For stereo operation the POWER AMP switch
(28)
of the PMP980S/PMP1680S
must be set to its upper position (MAIN L/MAIN R). Outputs A and B deliver
the stereo main signal to the P.A. speakers. Two active speakers, wired in
parallel, are connected to the preamp monitor output. They are used as
on-stage monitor speakers. The effects processors can be switched on and
off with a dual footswitch. This set-up is not possible with the PMP960M
(no stereo operation possible).
Loudspeaker (F.O.H. mix)
PMP1680S
2 x BEHRINGER EUROLIVE
Stack (B1800X & B1220, both passive)
Loudspeaker connection (monitor mix)
2 x BEHRINGER B215A (active)
PMP1680S Front Panel
(excerpt)
Dual footswitch
Fig. 5.1: EUROPOWER mixer as a stereo amplifier (example)
Both the PMP980S/PMP1680S and the PMP960M can be set-up for dual mono
operations. The POWER AMP switch
(28)
must be set to its lower (PMP960M)
or center position (PMP980S/PMP1680S). The two loudspeaker outputs
provide the main and monitor signals independently of each other and to two
loudspeakers each, which are wired in parallel.
Loudspeaker connection for F.O.H and
monitor mix (mono)
PMP960M Rear Panel
(excerpt)
2 x BEHRINGER
EUROLIVE F1520
(passive)
2 x BEHRINGER EUROLIVE B1520
(passive)
Fig. 5.2: EUROPOWER as a dual mono amplifier (example)