Behringer PMP1680S Manual - Page 9
Loudspeaker connection - europower mixer
View all Behringer PMP1680S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
9 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual ◊ Please use a dual footswitch for the PMP980S/PMP1680S, so that you can enable/disable FX 1 and FX 2 independently of each other. In this case, the tip of the ¼" plug controls FX 1, and the ring FX 2. Please be sure to only use professional locking-style speaker cables (type NL4FC). Please check the pin connections of your loudspeakers and cables depending on the EUROPOWER speaker output you choose. tip sleeve shield tip sleeve EUROPOWER PMP980S/PMP1680S OUPUT A 1+ 1- 2+ 2- MAIN L POS NEG - - Fig. 4.5: RCA cable 4.3 Loudspeaker connection MON POS NEG - - OUTPUT B - - POS NEG OUTPUT B 1+ 1- 2+ 2- Your PMP mixer is equipped with high-quality twist-lock professional style MAIN R POS NEG - - loudspeaker connectors, which ensure safe and trouble-free operation. This connector was especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into position and cannot be accidentally disengaged. MONO BRIDGE POS NEG - - POS - NEG - It prevents the occurrence of electrical shock and ensures the correct polarity. Each of the connectors carries only the assigned single signal (see tab. 4.1/fig. 4.7 EUROPOWER PMP960M and the information on the rear panel of the power mixer). OUTPUT A 1+ 1- 2+ 2- Professional speaker connector (compatible with Neutrik Speakon connectors) MAIN MONO POS NEG - - MON POS NEG - - BRIDGE - - - - OUTPUT B 1+ 1- 2+ 2- 1+ 1+ 2- 1- 1- 2- 2+ front view 2+ rear view MAIN MONO POS NEG - - MAIN POS NEG - - BRIDGE POS - NEG - Fig. 4.6: Professional twist-lock style connector Tab 4.1: Pin connections of loudspeaker connectors OUTPUT B 1+ OUTPUT B 1+ 8 Ω 1- 1- 4 Ω BRIDGE 1+ 2+ Fig. 4.7: Connector assignment 8 Ω 4 Ω 16 Ω 8 Ω