Beko BD532A User Manual - Page 21

12 3 3. Move the front door to half-way. 4. Remove the front door by pulling it upwards to release it from the right and left hinges. Steps carried out during removing process should be performed in reverse order to nstall the door. Do not forget to close the clips at the hinge housing when reinstalling the door. Removing the door inner glass The entire inner glass panel of the oven door can be removed for cleaning. 1. Open the oven door. 3 Replacing the oven lamp ^ DANGER •I Hot surfaces may cause burns! Make sure that the appliance is switched off and cooled down in order to avoid the risk of an electrical shock. The oven lamp is a special electric light bulb that can resist up to 300 °C. See Technical specifications, page 5 for details. Oven lamps can be obtained from Authorised Service Agents. Position of lamp might vary from the figure. If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. 3. Remove the oven lamp by turning it counter clockwise and replace it with the new one. 4. Install the glass cover. 12 1 Screw 2 Plastic profile 3 Inner glass pane 4 Plastic slot 2. Take out the screw(1) with a screwdriver 3. Take out the profile (2) than hold up to inner glass (3). 4. Then group the door again, put the glass pane (3) to the plastic slots (4) and group the profile. 20/EN