Beko DFS28R20 User Manual - Page 9

Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input Total power consumption Heater power consumption Total current (depends on the model) Drain pump power consumption Water pressure 220-240 V, 50 Hz (see rating label) 1800-2100 W (see rating label) 1800 W (see rating label) 10 A (see rating label) 30 W (see rating label) 0.3 -10 bar (= 3 - 100 N/cm² = 0.01-1.0 Mpa) C Technical specifications may be changed without prior notice to improve the quality of the product. C Figures in this manual are schematic and may not match the product exactly. C Values stated on the markings of the product or in the printed documents accompanying the product are obtained in the laboratory on basis of the relevant standards. Depending on operational and environmental conditions of the product, these values may vary. Condensing Drying System Condensing drying system ensures efficient drying of your dishes. Note for test institutions: Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address: [email protected] Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product may be found on the type label attached to the side wall of the door. 8 /39 EN Dishwasher / User's Manual