Beko DIN15X10 User Manual - Page 15

Preparation

Get Beko DIN15X10 PDF manuals and user guides View all Beko DIN15X10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Preparation a b 1 min. c d 1 Second e f 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet. about a minute. a second. and shake it. level. After determining hardness level of the supply water: 1. Switch on the machine and press the Time Delay and P keys simultaneously. Hold the keys pressed until entering the Settings menu. Rinse Aid and Salt indicators (model dependant) will flash on the display. 2. Select the salt indicator with the program key. Current regeneration level is displayed on the display. 3. Using Time Delay key, adjust water hardness level according to the hardness of the supply water. For correct setting please see "Water hardness level adjustment table". 4. Press On / Off key to save the setting. Water hardness level adjustment table Hardness Level English Water Hardness °dE German Water French Water Hardness °dH Hardness °dF Water Hardness Level Indicator 0th Level 0-5 1st Level 6-9 0-4 0-8 Press the Time Delay key to switch the water hardness 5-7 9-13 level to position P1. 2nd Level 3rd Level 4th Level 5th Level 10-15 16-19 20-24 25-62 8-12 13-15 16-19 20-50 14-22 23-27 28-34 35-90 Press the Time Delay key to switch the water hardness level to position P2. Press the Time Delay key to switch the water hardness level to position P3. Press the Time Delay key to switch the water hardness level to position P4. Press the Time Delay key to switch the water hardness level to position P5. If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher. If this is the case, "No Salt Warning Indicator" (if any) illuminates continuously on the panel of your machine. If the water hardness level adjustment is set to level 1, the "No salt warning indicator" will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the Salt indicator will not illuminate. Dishwasher / User's Manual 13/41 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Dishwasher / User’s Manual
13
/
41
EN
Preparation
a
b
c
d
e
f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute.
The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Switch on the machine and press the Time Delay and P keys simultaneously.
Hold the keys
pressed until entering the Settings menu. Rinse Aid and Salt indicators (model dependant) will
flash on the display.
2. Select the salt indicator with the program key. Current regeneration level is displayed on the
display.
3. Using Time Delay key, adjust water hardness level according to the hardness of the supply
water. For correct setting please see “Water hardness level adjustment table”.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
0th Level
0-5
0-4
0-8
Press the Time Delay key to switch the water hardness
level to position P1.
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
Press the Time Delay key to switch the water hardness
level to position P2.
3rd Level
16-19
13-15
23-27
Press the Time Delay key to switch the water hardness
level to position P3.
4th Level
20-24
16-19
28-34
Press the Time Delay key to switch the water hardness
level to position P4.
5th Level
25-62
20-50
35-90
Press the Time Delay key to switch the water hardness
level to position P5.
If the hardness level of the supply water is above 90 °dF or if you are using well water, then it
is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously on
the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.