Beko DIN48430 Owners Manual - Page 27

Operating the product On/Off Key When you press the On/Off key, the indicator lights illuminate on the display for ON position. The lights turn off in OFF position. Programme Selection / Programme Cancel key Select the desired programme using the "programme selection keys" and press the button. To cancel the running programme, open the door of the machine and press and hold the Programme Start/Pause/Cancel key for 3 seconds. After the 3 - 2 - 1 countdown, 0:01 is displayed, close the door of the product and wait for the draining process complete. Draining is completed in 2 minutes and the machine gives an audible warning when it is completed. Function Keys If you press any of the Function keys during programme selection or time delay selection, an affirmative key signal will be heard provided that the relevant function is supported by the selected programme. Function will be deemed selected when the indicator of the selected function is lit. To cancel the selected function, keep the function key pressed until the function indicator disappears. Preparing the machine 1. Open the door of the dishwasher. 2. Place the dishes in accordance with the instructions in the user manual. 3. Make sure that the upper and lower impellers rotate freely. 4. Put adequate amount of detergent into the detergent dispenser. Programme selection 1. Press the On/Off button to turn on your machine. 2. Check the Salt and Rinse Aid indicators and add salt and/or rinse aid if needed. 3. Refer to the table of "Programme data and average consumption values" to determine a washing programme suitable for your dishes. 4. Selected programme will start when you close the door of your machine. Dishwasher / User's Manual 25/46 EN