Beko DIN48430 Owners Manual - Page 32
Starting the programme, Cancelling the programme, Salt indicator, Rinse Aid indicator
View all Beko DIN48430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Operating the product C You can select and start a new programme following the cancellation of Time Delay function. C Time Delay function cannot be set after the programme starts. Starting the programme Close the door of your machine to start it after selecting the programme and auxiliary functions. C Your machine performs water softening depending on the hardness level of the supply water. Washing time can change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes. C Pay attention not to open the door of the machine when it is running. There may be a rush of vapour when you open the door of your machine; be careful. C The machine will remain silent in pause mode for some time in order to remove the water from the machine and on the dishes completely and to have the water softener cleaned, and then it will resume running in drying mode. Cancelling the programme Open the door of the product Press and hold the Programme Selection / Programme Cancel keys for 3 seconds. After the 3 - 2 - 1 countdown, 0:01 is displayed, close the door of the product and wait for the draining process complete. Draining is completed in 2 minutes and the machine gives an audible warning when it is completed. C There might be residues of detergent or rinse aid in the machine and/or on the pieces being washed depending on the step the programme you have cancelled was in. Salt indicator ( ) Please check the salt indicator on the display to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt indicator appears on the display of your machine. C Adjusting the water hardness level is explained in Water Softening System section. Rinse Aid indicator ( ) Please check the rinse aid indicator on the display to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid indicator appears on the display of your machine. 30 /46 EN Dishwasher / User's Manual