Beko DSV64 User Manual - Page 15

B The air ventilation hose should not be connected to the chimney of a stove or a fireplace. B Do not operate your machine at the same time with heaters such as a coal or gas stove. Airflow may cause the chimney to flare up. 3.3 Adjusting feet In order to ensure that your product operates more silently and vibration-free, it must stand level and balanced on its feet. Front feet of your product can be adjusted. Balance the machine by adjusting the feet. 1. Loosen the feet by hand. 2. Adjust the feet until the product stands level and firmly on the floor. C Do not use any tools to loosen the adjustable feet, otherwise, they can be damaged. C Never remove the adjustable feet from their housings. C You may supply 2 plastic pieces from an Authorized Service with 2951620100 part number. These parts prevent your machine from slipping when the machine locates on wet and slippery surfaces. You may assemble mentioned parts to the front adjustable feet by fitting and pressing them to snap into ground of feet. 3.4 First use • Make sure that the power connections of the product are in accordance with the instructions given in relevant chapters of this manual. 3.5 Transportation of the machine 1. Unplug the machine from the mains. 2. Remove the water drain (if any) and vent hose connections. 3. Drain water remained in the machine completely before transportation. 3.6 Changing the illumination lamp In case an illumination lamp is used in your laundry dryer To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way. ''The lamps used in this appliance have to withstand extreme physical conditions such as vibrations and temperatures above 50 °C.'' Dryer / User Manual 15 / EN