Beko DSV64 User Manual - Page 28
Solution suggestions for problems
View all Beko DSV64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
9 Solution suggestions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry come out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not overload the machine. Machine does not switch on or the programme does not start. Machine is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in. • The loading door may be ajar. Make sure that the loading door is properly closed. • Programme might have not been set or the «Start/Pause/Cancel» button might have not been pressed. Make sure that the programme has been set and it is not in "Pause" mode. • «Childproof lock» might have been activated. Deactivate the childproof lock. • The condenser cover on the models with a condenser might not be closed securely. Make sure that the condenser cover and the red lock is closed securely. Programme has been interrupted without any cause. • The loading door may be ajar. Make sure that the loading door is properly closed. • Electricity may be cut off. Press «Start/Pause/Cancel» button to start the programme. • The condenser cover on the models with a condenser might not be closed securely. Make sure that the condenser cover and the red lock is closed securely. Laundry has shrunk, become felted or deteriorated. • A programme suitable for the laundry type might have not been used. Dry only the laundry which is suitable for drying in your machine after checking the labels on your clothes. • Select a programme with suitable low temperature for the laundry type to dry your clothes. Drum lightning does not come on. (for models equipped with a lamp) • The machine might have not been started by using the On/Off button. Make sure that the machine is On. • Bulb may have blown. Call the authorized service to replace the bulb. • The condenser cover on the models with a condenser might not be closed securely. Make sure that the condenser cover and the red lock is closed securely. 2 beeps heard when the buttons are pressed or the programme selection knob is turned. • Childproof lock» might have been activated. Deactivate the childproof lock. • Programme selection knob might be turned to an undefined position. Select one of the defined programmes. "Filter cleaning" light is flashing. • Filter might have not been cleaned. Clean the cover filter. "Final / Anti-creasing" LED is on. • Programme has come to an end. Turn off the machine and take out the laundry. 3 beeps are heard when you press the Start/Pause/Cancel button • The loading door may be ajar. Make sure that the machine is plugged in. • Make sure that the condenser cover and the red lock is closed securely. Also for products equipped with a condenser: "Water tank" warning LED is flashing. • Water may be full. • Drain the water in the water tank. A Call an authorised service agent if the problem persists. 28 / EN Dryer / User Manual