Beko DTLCE80051 Owners Manual - Page 14

C NOTE • Additional laundry may be loaded/taken out during the delayed start time. At the end of the time delay countdown, the warning symbol disappears and the drying process starts. Changing the delay time If you want to change the time during countdown, turn the on/off/program selection knob to cancel the program. Select the desired program and repeat the delayed start process. Cancelling the delayed start function If you wish to cancel the delayed start countdown and start the program right away, rotate the on/off/program selection knob to cancel the program. Select the desired program and press "Start/Pause". 5.6 Warning indicators C NOTE • Warning indicators may vary depending on the model of your dryer. Filter cleaning When the programme is completed, the warning indicator for filter cleaning turns on. Water tank If the water tank fills up while the programme continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the programme by pressing the Start / Standby button. Warning indicator turns off and programme resumes. Filter drawer /Heat exchanger cleaning When the programme is finished, the cleaning symbol of the heat exchanger or filter drawer may light up. 5.7 Starting the programme Press the Start/Stand-by button to start the programme. Drying indicator will light up, indicating that the programme has started. 5.8 Child Lock The drying machine has a child lock which prevents the programme flow from being interrupted when the buttons are pressed during a programme. When the child lock is activated, all buttons on the panel except the On/Off/Programme selection knob are deactivated. Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new programme after the current programme is finished or to be able to interfere with the programme. To deactivate the child lock, keep the same buttons pressed for 3 seconds. C NOTE • When the child lock is activated, the child lock warning indicator on the screen turns on. • Child lock deactivates when the drying machine is turned off and on by the On/ Off/Cancel knob. When the child lock is active: When the drying machine runs, or in standby state, the indicator symbols won't change upon changing the position of the programme selection knob. C NOTE • When the drying machine runs and the child lock is active, it beeps twice when the programme selection knob is turned. If the child lock is deactivated without returning the programme selection knob to its previous position, programme will terminate due to the change in the programme selection knob position. 14 Dryer / User Manual