Beko DTLCE80051 Owners Manual - Page 17

6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle. A WARNING! • Condensed water is not drinkable! • Never remove the water tank when the programme is running! If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause button to resume the drying cycle. To drain the water tank: 1. Remove the water tank in the drawer or container carefully. To clean the condenser: • If a drying process has been carried out, open the door of the machine and wait until it cools down • Unlock the 2 condenser locks after opening the kick plate • Pull out the condenser. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 2. Drain the water in the tank. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. • If there is lint accumulation in the funnel of the water tank, clean it under running water. • Place the water tank into its seat. C NOTE • If the direct water draining is used as an option, there is no need to empty the water tank. 6.4 For the condenser; C NOTE • Clean the condenser after every 30 drying cycles or once a month. Dryer / User Manual Close the kick plate cover. 17