Beko DTLCE80051 Owners Manual - Page 15

5.9 Changing the programme after it is started You can change the programme you selected to dry your laundry with a different programme after the drying machine starts running • For instance, select Extra Dry programme by turning the On/Off/Programme selection knob to select Extra Dry instead of Iron Dry. • Press the Start/Stand-by button to start the programme. Adding and removing clothes during stand-by If you want to add or remove clothes to/from the drying machine after the drying programme starts: • Press the Start/Stand-by button to put the drying machine in Stand-by state. The drying operation stops. • Open the loading door while in Standby state, and close the door after you remove or add laundry. • Press the Start/Stand-by button to start the programme. C NOTE • Adding laundry after the drying operation starts may cause the dried laundry inside the machine to mix with wet laundry and leave the laundry damp at the end of operation. • Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases programme duration and energy consumption. So, it is recommended to add laundry before the programme starts. • If a new programme is selected by turning the programme selection knob while the drying machine is in stand-by, the running programme terminates. 5.10 Cancelling the programme If you want to cancel the programme and terminate the drying operation for any reason after the drying machine starts running, turn the On/Off/ Cancel knob, the programme will be cancelled. A WARNING! • The inside of the drying machine shall be extremely hot when you cancel the programme during machine operation, so run the refresh programme to allow it to cool down. 5.11 End of programme When the program ends, the Last/Anti-Wrinkle and Fibre Filter Cleaning Warning LEDs on the program follow up indicator will illuminate. Loading door may be opened and the dryer machine becomes ready for another run. Bring the On/Off/Programme selection knob to On/Off position to turn the drying machine off. C NOTE • If the laundry is not removed after the programme is completed, the wrinkle prevention function activates for 2 hours to prevent the laundry inside the machine to get wrinkled. The programme tumbles the laundry with 10-minute intervals to prevent them from wrinkling. WARNING! • Do not touch the inner surface of the drum while adding or removing clothes during a continuing programme. The drum surface is hot. Dryer / User Manual 15