Beko HIC64102 User Manual - Page 11
usage, assembly, clamp, available
View all Beko HIC64102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
usage of the assembly clamp (if available) * For worktop thickness's of less than 20 mm insert a wood spacer between the bracket and the under surface of the worktop. Back view 1. Prepare the worktop as shown 2. Remove the sealing gasket from the packaging. 3. The sealing gasket provided in the package must be affixed around the glass frame on the lower surface during the installation of your hob as shown. 4. Position the appliance centrally in the worktop. 5. Tighten the screws of the springs located on the base of the appliance to secure the appliance in position. E . E .S in E 0.1 Attention: When installing the hob above a cupboard, a dividing shelf as a pictured above must be installed. It installing above an underbench oven this is not required. If, for example, due to the fitting of the appliance above a drawer, the underside of the appliance is touchable, it must be covered by a wooden plate. Do not install above a refrigeration appliance, as the performance of this appliance will be severely affected by radiated heat. 10