Beko HIC64102 User Manual - Page 9

Do not connect the appliance to the electricity supply until all packing and transit protectors have been removed. Before your appliance is connected to the mains electricity supply, check to ensure that the voltage and frequency shown on the rating label corresponds with your power supply. - Before applying for installation have the electrical wiring of your home ready for connection. This product must only be installed by a qualified electrician Warning! This appliance must be earthed. If the mains connection lead is damaged, it must be replaced by a special connection lead which is available from our customer service department. The cable length should be 2 m. max for isolation safety. electrical connection The mains cable must pass through the cable clamp. The mains cable should be routed away from the appliance. This appliance must be earthed. Our company shall not held responsible for any damage caused by the utilisation of the hob without an EARTH connection. The appliance must be connected with the technically equivalent cable of the type H05RRF 3G 2.5 Cable Connections; copper bridge L2 3 L1 2 1 MAINS CABLE 4 N Occ 3x2,5 mm2 220-240V 8