Beko HQC63402E User Manual - Page 18

Disabling the timers: First you must display the timer by changing the position of the "G" key until the timer appears. This value can later be cancelled in 2 different ways: • By decreasing the value step by step to "00" by touching "-" key. • By touching "+" and "-" keys simultaneously for half second until "00" appears on timer display. When the time is over, an audible alarm will sound. Touch any key on the touch control panel to silence the audible alarm. Display the remaining time value of the cooking zone unintentionally, the cooking zone will automatically be timer 3 (indicator LED flashes) to the timer display (the deactivated after a certain period of time. (see, Table- indicator LEDs of the active timers of the cooking 1). Operation time limit depends on the selected zones 1 and 4 in fact will not be visible on the timer temperature setting. If there is a timer assigned for the display). cooking zone, "00" appears on the timer display for Keep warm function (if any) 10 seconds (10 seconds later, residual heat indicator Keep Warm function of the cooking zone helps to keep turns on). the food warm by selecting an additional temperature Then, timer display is turned off. level between 0 and 1. Touch"L" key to activate the Keep Warm function. "ou Then, "0" LED flashes. Touch key again to disable the cooking zone. After disabling the cooking zone automatically as described above, it becomes operational again and maximum operation time is applied for this temperature setting. Operation time constraints The hob control is equipped with an operation time limit. When one or more cooking zones are left on Table-1: Temperature settin parameters; C cle time 47.0 seconds Temperature OFF Time - ON Time - Operation time Booster time - setting 0 seconds 0 seconds 0 limit - hour 0 seconds 45.6 1.4 6 60 2 43.6 3.4 6 180 3 41.3 5.7 5 288 4 38.4 8,6 5 390 5 35.9 11.1 4 510 6 33,1 13,9 1.5 150 7 26.2 20.8 1.5 210 8 19.2 27.8 1,5 270 9 0 47,0 1,5 Residual Heat Functions Display continues to flash until the maximum residual For a deactivated cooking zone whose surface heat time is over or the cooking zone is selected and temperature is sensed to be above 60°C or whose enabled. display indicates a value above 60°C, a " " (residual heat) symbol appears on the display. When residual heat falls below 60°C, "0" appears on the display. When power restores after a power failure and if the residual heat of the relevant cooking zone was above 60°C before the failure, residual heat display flashes. 18/EN