Beko KDG653 User Manual - Page 36

8 Troubleshooting Oven emits steam when it is in use. • It is normal that steam escapes during operation. >>> This is nota fault. Product emits metal noises while heating and cooling.; • When the metal parts are heated, they may expand and cause noise. >>> This is nota fault. product does not operate.l • The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. Ifnecessary, replace or reset them. • Product is not plugged into the (grounded) socket. >>> Check the plug connection. There is no ignition spark.1 • No current. >>> Check fuses in the fuse box. • Time is not set. >>> Set the time. There is no gas.1 • Main gas valve is closed. >>> Open gas valve. • Gas pipe is bent. >>> Install gas pipe properly. Burners are not burning properly or at all.; • Burners are dirty. >>> Clean burner components. • Burners are wet. >>> Dry the burner components. • Burner cap is not mounted safely. >>> Mount the burner cap properly. • Gas valve is closed. >>> Open gas valve. • Gas cylinder is empty (when using LPG). >>> Replace gas cylinder. Baking takes too long4 Pipe pressure is low. >>> Adjust a higher gas mark. (In models with timer) Clock display is blinking or clock symbol is on. • A previous power outage has occurred. >>> Adjust the time/Switch of the product and switch it on again. Consult the Authorised Service Agent or technician with licence or the dealer where you have purchased the product if you can not remedy the trouble although you have implemented the instructions in this section. Never attempt to repair a defective product yourself. 36/EN