Beko MGB25332BG Owners Manual - Page 12

3 Installation and connection 3.1 Installation and connection •• Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. •• Remove any protective film found on the microwave oven cabinet surface. •• Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. •• This appliance has been designed for domestic use only. •• This oven is intended for built-in use only. It is not intended for counter-top use or for use inside a cabinet. •• Please observe the special installation instructions. •• The appliance can be installed in a 60cm wide wall-mounted cabinet (at least 50 cm deep and 85 cm off the floor). •• The appliance is fitted with a plug and must only be connected to a properly installed grounded socket. •• The mains voltage must correspond to the voltage specified on the rating plate. •• If the plug is no longer accessible after installation, an all-pole isolating switch must be present on the installation side with a contact gap of at least 3 mm. •• Adapters, multi-way sockets and extension cords must not be used. Overloading can result with a risk of fire. The accessible surface may be hot during operation. C Do not trap or bend the power cable. 12 / EN Microwave Oven / User Manual