Beko MGF23210 User Manual - Page 22

CleanIng and Care

Page 22 highlights

5 Cleaning and Care •• Unplug your oven before cleaning. •• Do not use abrasive cleaners, steel wools, rough washing clothes or abrasive chemicals such as sulphur or chloride on or at any parts of your microwave oven. Outer surfaces •• To clean the outer surfaces of the oven, first wipe them with a soft cloth soaked in warm soapy water. Then wipe them dry again with a soft cloth. •• Do not allow water ingress into the ventilation openings in order to avoid damage to the live parts inside the oven. Clean the control panel of your microwave oven only with a damp and soft cloth. •• Do not use cleaning sprays or more soap and water. They may cause problems in control mechanism. •• Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation. •• Cleaning the door seals and adjacent parts: Use hot soapy water. Clean with a dish cloth, do not scour. Do not use a metal or glass scraper for cleaning. Inner surfaces To clean the inner surfaces of the oven: •• To soften the dried stains, place a glass of water inside the microwave oven and heat for 2-3 minutes. The steam created will soften dried stains making cleaning easier. •• Clean the inner surfaces and ceiling with a soft and soapy cloth. And dry again with a soft cloth. •• To remove the odours inside the oven, boil a mixture of water and a few table spoons of lemon juice for a couple of minutes inside the oven. •• To clean the inner base of the oven, remove the roller glass tray and roller support. Wash the roller glass tray and roller support in soapy water. Then, rinse and dry them. •• Before starting the oven, install the roller support and glass tray securely. •• When cleaning the inner surfaces of the oven door, use a non-abrasive soft sponge or cloth. For transportation; •• Unplug the appliance. •• Pack the glass tray in a way to prevent them from breaking and moving inside the oven. Transport it separately if needed. •• Tape the front door to the body. •• Prevent impact against the front glass, door and panel. •• Transport the product in normal position. Do not lean it aside or back. 22 / 23 EN Microwave Oven / User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Microwave Oven / User Manual
22 / 23
EN
Unplug your oven before cleaning.
Do not use abrasive cleaners, steel wools, rough
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your
microwave oven.
Outer surfaces
To clean the outer surfaces of the oven, first
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
Do not allow water ingress into the ventilation
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
Do not use cleaning sprays or more soap and
water. They may cause problems in control mec-
hanism.
Failure to maintain the oven in a clean condition
could lead to deterioration of the surface that
could adversely affect the life of the appliance
and possibly result in a hazardous situation.
Cleaning the door seals and adjacent parts: Use
hot soapy water. Clean with a dish cloth, do not
scour. Do not use a metal or glass scraper for
cleaning.
5
CleanIng and Care
±nner surfaces
To clean the inner surfaces of the oven:
To soften the dried stains, place a glass of water
inside the microwave oven and heat for 2-3 mi-
nutes. The steam created will soften dried stains
making cleaning easier.
Clean the inner surfaces and ceiling with a soft
and soapy cloth. And dry again with a soft cloth.
To remove the odours inside the oven, boil a mix-
ture of water and a few table spoons of lemon
juice for a couple of minutes inside the oven.
To clean the inner base of the oven, remove the
roller glass tray and roller support. Wash the rol-
ler glass tray and roller support in soapy water.
Then, rinse and dry them.
Before starting the oven, install the roller
support and glass tray securely.
When cleaning the inner surfaces of the oven
door, use a non-abrasive soft sponge or cloth.
For transportatIon;
Unplug the appliance.
Pack the glass tray in a way to prevent them from
breaking and moving inside the oven. Transport
it separately if needed.
Tape the front door to the body.
Prevent impact against the front glass, door and
panel.
Transport the product in normal position. Do not
lean it aside or back.