Belkin F1DD104L User Manual - Page 15

Using the KVM Switch section To modify the hot-key preceding sequence from the default Scroll Lock, you can 1 either hit the hot-key sequence: scrlk - scrlk - H - (y), y = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK (as detailed in the Hot-Key Quick Reference Table below). or 2 You can use another method: Press and hold the last button to enter the hot-key setting mode. 3 Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then 4 release the button. Step 2. Within two seconds, you should hit any of the selectable hot-key triggers 5 (y), y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT CTRL, or RIGHT CTRL to be your hot-key trigger. 6 For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS - CAPS - command key. 7 For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot-Key Quick-Reference Table below. 8 Hot Key Quick Reference Table 2-/4-Port SOHO KVM Switch with Audio -- & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s) * user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL Command Hot Keys1 Front-Panel Buttons Description ScrLk + ScrLk + (x) Select Computer Channel 2 (Joint-select PC port/audio (x is a top-row number key) x = 1~2 / x = 1~4 Press the computer icon on the left of a button to select Select the active computer channel (Hot key: Joint-select PC port/audio & mic, & mic, if binding is enabled) for PC channel no. the active computer channel if binding is enabled) Select Audio & Mic Channel 2 (Joint-select PC port and audio & mic, if binding is enabled) Bind Computer and Audio & Mic Switching 2 [Default] Unbind PC and Audio & Mic Switching 2 Next lower PC channel 2 (Joint-select PC/audio & mic, if binding is enabled) Next higher PC channel 2 (Joint-select PC/audio & mic, if binding is enabled) Previous PC channel Define Hot-Key Preceding Sequence ScrLk + ScrLk + (Fy) Fy = F5~F6/Fx=F5~F8 (Fy is a function key) ScrLk + ScrLk + Q ScrLk + ScrLk + W ScrLk + ScrLk +  (arrow up) ScrLk + ScrLk +  (arrow down) ScrLk + ScrLk + Backspace ScrLk + ScrLk + H + (y) y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT_CTRL, or RIGHT_CTRL -- -- -- -- -- -Press and hold down last button (Button 2 / Button 4) until you hear three beeps, release the button, and then press (y) key. This resets hot-key preceding sequence to SCROLL LOCK. Select the active audio & mic channel (Hot key: Joint-select PC and audio & mic channel, if binding is enabled) Enable the binding of PC port and audio & mic switching. (Hot key: Once this feature is enabled, any computer and/or audio & mic switching by hot keys is bound together) (factory default) Disable the binding of PC port and audio & mic switching Select the next lower connected PC channel (Hot key: Joint-select PC/audio & mic, if binding is enabled) Select the next higher connected PC channel (Hot key: Joint-select PC/audio & mic, if binding is enabled) Toggle between the previous channel and current channel Select the hot-key preceding sequence among 6 alternative keys Read KVM Firmware Version Open Note Pad ScrLk + ScrLk + V Read the version of firmware that is currently on the KVM Switch. This is helpful when a firmware -- upgrade is performed as it gives you the ability to read the version of firmware, before and after the upgrade, to ensure the firmware has installed correctly. 13