Belkin F1DD104L User Manual - Page 19

section Firmware-Upgrade Guide Upgrade Using the Windows Version Utility 1 Prepare your KVM Switch and the Host PC 2 Note: The host PC must be running Windows 2000 or above in order to complete the firmware upgrade. 3 Step 1. Ensure that the power adapter is connected to the KVM Switch. Check to make 4 sure that the KVM cables for port 1 remain connected to the KVM Switch and the USB connector at the other end is plugged into a USB port on the host PC. The monitor connector is not used. The console monitor, mouse, and keyboard are 5 disconnected from the console ports of the KVM Switch and plugged in directly to the host PC. 6 Note: The power supply should also remain connected to the KVM Switch. 7 Step 2. The cables that are connected to port 1 of the KVM Switch also need to be 8 connected to the host PC. Connect the USB cable to the host PC. Important: Some host computers may not have enough USB ports to support the use of a USB keyboard, USB mouse, and the USB cable needed to perform the upgrade. (An example of this is a Mac mini, which only has two USB ports.) If this occurs, the keyboard does not have to be connected to the host PC since the mouse is used to perform the upgrade. Step 3. Power on the host PC and copy/download the firmware-upgrade utility, "Belkin Soho.exe", and the firmware-upgrade file, "*.blk", from belkin.com/support. 17