Belkin F1DD104L User Manual - Page 23

section Firmware-Upgrade Guide Step 9. Finally, unplug the power cable from the back of the KVM Switch and all other 1 cables from the KVM Switch, and perform a cold reset. Reconnect all the cables again to the KVM Switch. 2 Now you can enjoy the newly added functionality and compatibility of the new firmware version. 3 Note: After you have finished the firmware-upgrade process, try the port switching and other functionalities of the KVM Switch to see whether it works fine with the 4 new firmware. If it does, then this upgrade process was successfully completed. Congratulations! 5 If the file-upload process encounters an error and cannot complete successfully, please refer to the "Firmware-Upgrade Troubleshooting" section. 6 7 Upgrade Using the Mac Version Utility Prepare your KVM Switch and the Mac Host 8 Step 1. Ensure that the power adapter is connected to the KVM Switch. Check to make sure that the KVM cables for port 1 remain connected to the KVM Switch. The monitor, mouse, and keyboard should be disconnected from the console port of the KVM Switch and plugged in directly to the host computer. The power supply should also remain connected to the KVM Switch. Step 2. Power on the Mac host and copy/download the firmware-upgrade utility, "Belkin Soho.pkg", and the firmware-upgrade file, "*.blk", to it. 21