Belkin F1DH102L User Manual - Page 14

Using the KVM Switch To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk - scrlk - H - (y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUM LOCK (as detailed in the Hot Key Quick Reference Table below). or You can use another method: Press and hold the last button to enter the hot-key setting mode. Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then release the button. Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUM LOCK, to be your hot-key trigger. For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS - CAPS - command key. For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot Key Quick Reference Table below. Command Select Computer Channel 2 (Joint-select PC port/audio & mic, if binding is enabled) Hot Key Quick Reference Table 2-/4-Port SOHO KVM Switch with Audio & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s) * user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL Hot Keys1 Front-Panel Buttons Description ScrLk + ScrLk + (x) (x is a top-row number key) x = 1~2 / x = 1~4 for PC channel no. Press the computer icon on the left of a button to select the active computer channel Select the active computer channel (Hot key: Joint-select PC port/audio & mic, if binding is enabled) Select Audio & Mic Channel 2 (Joint-select PC port and audio & mic, if binding is enabled) Bind Computer and Audio & Mic Switching 2 [Default] Unbind PC and Audio & Mic Switching 2 Next lower PC channel 2 (Joint-select PC/audio & mic, if binding is enabled) Next higher PC channel 2 (Joint-select PC/audio & mic, if binding is enabled) Previous PC channel Define Hot-Key Preceding Sequence Read KVM Firmware Version ScrLk + ScrLk + (Fy) Fy = F5~F6/Fx=F5~F8 (Fy is a function key) ScrLk + ScrLk + Q ScrLk + ScrLk + W ScrLk + ScrLk +  (arrow up) ScrLk + ScrLk +  (arrow down) ScrLk + ScrLk + Backspace ScrLk + ScrLk + H + (y) y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT_CTRL, or RIGHT_CTRL Open Note Pad ScrLk + ScrLk + V -- -- -- -- -- -Press and hold down last button (Button 2 / Button 4) until you hear three beeps, release the button, and then press (y) key. This resets hot-key preceding sequence to SCROLL LOCK. -- Select the active audio & mic channel (Hot key: Joint-select PC and audio & mic channel, if binding is enabled) Enable the binding of PC port and audio & mic switching. (Hot key: Once this feature is enabled, any computer and/or audio & mic switching by hot keys is bound together) (factory default) Disable the binding of PC port and audio & mic switching Select the next lower connected PC channel (Hot key: Joint-select PC/audio & mic, if binding is enabled) Select the next higher connected PC channel (Hot key: Joint-select PC/audio & mic, if binding is enabled) Toggle between the previous channel and current channel Select the hot-key preceding sequence among 6 alternative keys Read the version of firmware that is currently on the KVM Switch. This is helpful when a firmware upgrade is performed as it gives you the ability to read the version of firmware, before and after the upgrade, to ensure the firmware has installed correctly. Notes: 1. The USB keyboard hot keys allow faster and broader control of your KVM Switch and audio/mic switching in addition to the front-panel buttons. If you have configured a hot-key preceding sequence other than two consecutive scroll locks, you should change your hot-key sequence accordingly. (For hot-key preceding sequence configuration, please refer to the Hot Key Quick Reference Table.) 2. When the binding of PC and audio and mic switching is enabled by the hot-key sequence: ScrLk + ScrLk + Q, any PC and audio and mic switching by hot keys are bound together. (However, the binding will not affect the independent front-panel button operation.) To remove this binding, use the hot-key sequence: ScrLk + ScrLk + W. Mac® User: Standard PC keyboard mapping to MAC keyboard -- ScrLk + ScrLk + C =  (CD/DVD drive eject key); ScrLk + ScrLk + F10 = F13 ; ScrLk + ScrLk + F11 = F14 ; ScrLk + ScrLk + F12 = F15. LED Information: Computer LED status (3 states: Lit/Flashing/Off). Lit = Active port with link established between KVM Switch and computer (via USB interface); Flashing = Active port but with no link established between KVM Switch and computer; Off = Non-active port. 12 Audio LED status (2 states: Lit/Off). Lit = Active port for audio output; Off = Non-active port for audio output.