Belkin F1DH102L User Manual - Page 8
Installing the KVM Switch
View all Belkin F1DH102L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the KVM Switch Pre-Configuration Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor; the location of your CPUs from your console; and the length of the cables you use to connect your computers to the KVM Switch. Cautions and Warnings Avoid having cables near fluorescent lights, air-conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners). Single-Switch Installation This section provides complete instructions for the hardware setup of a single KVM Switch. (F1DH102L or F1DH104L) Important Note: Before attempting to connect anything to the KVM Switch or into your computer(s), make sure that everything is powered off. Plugging and unplugging cables while computers are powered on may cause irreversible damage to the computers and KVM Switch. Belkin will not be responsible for damage caused by these actions. For each dual-head VGA/USB computer to be connected to the Switch, one dual-head VGA/USB cable is necessary. Cables are available in longer lengths; see part numbers below: 10 ft. Cable - F1D9105-10 15 ft. Cable - F1D9105-15 6