Belkin F1DN108U User Manual - Page 16
Step 2, Connecting the Console to the Switch - drivers
UPC - 722868600825
View all Belkin F1DN108U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
section Installation Step 2 Connecting the Console to the Switch (required) 1 Warning: Before attempting to connect anything to the Switch or your computers, please ensure that all computer equipment and devices are 2 powered off. Plugging and unplugging cables while computers are powered on may cause irreversible damage to the computers and/or the Switch. Belkin International, Inc., is not responsible for damage caused by your 3 failure to do so. Before you connect your console to the Switch, make sure that your USB 4 keyboard and mouse work properly with all your computers (the Human Interface Device (HID) USB drivers are installed on all computers). 5 2.1 Connect your monitor VGA cable to the VGA port on the back of the Switch in the "User Console" section. (Refer to diagram below.) 6 7 2.2 Connect your keyboard and mouse USB cables to the USB keyboard and mouse ports on the back of the Switch in the "User Console" section. (Refer to diagram below.) 11