Belkin F1DP101M User Manual - Page 27
To specify and name servers, Installing new Switch-Definition Files SDFs
![]() |
View all Belkin F1DP101M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
section Remote Installation To specify and name servers: 1. Click next to the "Manufacturer" and "Model" fields field and select the 1 KVM-switch configuration that best suits your configuration. 2. Click . The number of possible connected servers will appear in the 2 Server Name section. 3. Change the name of each connected server by highlighting the server and 3 typing in a new name. 4. Click . to save the changes. 4 Note: You will need to change the name of every server you want to access. Server names left as "UNUSED" cannot be accessed. 5 6 Installing new Switch-Definition Files (SDFs) If your KVM switch-configuration type is not listed in the drop-down list, contact 7 Belkin Technical Support at (800) 282-2355 to request an updated SDF with the desired KVM-configuration list. 8 To install the SDF: 1. Load the file onto the client computer. 9 2. Click to locate the new SDF. 3. Click "Install" to update the Switch with the new file. Note: If you change the hot-key sequence in the KVM Switch to "Print Screen", "Ctrl", or "F12", you must load a new switch-definition file (SDF) for the corresponding hot key. The SDF can be downloaded from www.belkin.com/support. 24
![](/manual_guide/products/belkin-f1dp101m-user-manual-fb23aa5/27.png)