Belkin F1DP101M User Manual - Page 47
Restoring Factory Defaults
View all Belkin F1DP101M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
section Using the Remote IP Device Restoring Factory Defaults 1 The "Restore Factory Settings" section on page 29 explains how to restore factory settings from the web interface. When you cannot access the system 2 (you have forgotten the user name, IP address, or password), you can restore factory defaults from the IP Device. 3 To restore factory defaults: 1. Press and hold down the "Go-Local" button on the back of the IP Device for 4 five seconds while powering up the IP Device. The IP Device will boot up in safe mode. 2. Wait 30 seconds for the IP Device to reboot. 5 3. Log in with the default IP address of the unit: http://192.168.2.155/config 6 The blank login screen will appear (no background picture). Note: Do not start the IP address with https. 7 4. Type in the following default user name and password (case-sensitive), and click "Login". This user name and password only work immediately after the 8 reset procedure described above. Safe-Mode User Safe-Mode Password 9 admin SAFEmode 5. From the menu, select "Restore Factory Settings". A warning will appear advising you that all device data will be erased. 6. Click "Restore". The factory defaults will be restored. When the process finishes, you will be prompted to reboot. 7. Click "Reboot" to restart the IP Device. 44