Belkin F1DS102T User Manual - Page 19
General, Usb - F1ds102t, F1ds104t Only, Audio And Microphone - mac
View all Belkin F1DS102T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 34 TROUBLESHOOTING The mouse is not detected at boot up. • Check the cables and make sure that they are inserted properly. The computer boots up fine, but the mouse does not work. • Make sure it is plugged in properly. • Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this. • Try a different mouse. When I switch from one port to another, mouse movement is completely erratic. • Make sure you do not have more than one mouse driver installed. • Make sure that the driver is either for a standard PS/2 mouse or a PS/2 mouse compatible with Microsoft. • Make sure you do not have any mouse drivers loaded in your "CONFIG.SYS" or "AUTOEXEC.BAT" files. • Avoid moving the mouse or pressing the mouse button when switching ports on the KVM Switch. • You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the KVM Switch for about 2-3 seconds, and then plugging it in again. 34 TROUBLESHOOTING GENERAL My computer does not boot when connected to the KVM Switch and works fine when I connect the keyboard, video, and mouse directly to it. • Make sure that the keyboard and mouse cables are connected tightly between the KVM Switch and the computer. • Check that the keyboard and mouse cables are not crossed. USB - (F1DS102T, F1DS104T) only I am connecting my computer to the USB SOHO Series KVM Switch via USB and my keyboard and mouse do not work. • Prior to connecting the USB SOHO Series KVM Switch, make sure that the HID USB driver is installed on each computer. (To install the HID USB driver, connect a USB mouse and USB keyboard to the computer. Windows should automatically install the drivers.) Some of the keys on my keyboard are not functioning properly when I use a Mac computer. • Because you are using a PC keyboard on a Mac computer, a few of the option keys on your PC keyboard may be reversed. All major keys will function as labeled. AUDIO AND MICROPHONE I have connected the speakers to the KVM Switch and I am not getting any sound from my computer. • Check that the sound is enabled on the computer by going into the system setting. • Check that the volume is turned up in your sound configuration. • Make sure that the audio cable is connected properly and connected to the appropriate connector. • Check that the speakers you are using are functioning properly. 35