Belkin F1DS102T User Manual - Page 6

P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 8 OVERVIEW Specifications Part No.: F1DS102P, F1DS104P Power: By PS/2 keyboard port or optional 9V DC, 600mA AC adapter with center pin positive polarity PCs Supported: 2 (F1DS102P) 4 (F1DS104P) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitor Supported: VGA and SVGA MultiSync®, LCD (with use of adapter cable) Max Resolution: 2048X1536@85Hz Keyboard Input: 6-pin miniDIN (PS/2) Mouse Input: 6-pin miniDIN (PS/2) Audio Input/Output: 3.5mm jack Microphone Input/Output: 3.5mm jack VGA Port: 15-pin HDDB type LED Indicators: 2 (F1DS102P) 4 (F1DS104P) Enclosure: High-impact plastic Dimensions: F1DS102P (H) 6.75 x (W) 4.25 x (D) 7.75 inches (H) 17.2 x (W) 10.8 x (D) 19.7 centimeters F1DS104P (H) 7.75 x (W) 4.75 x (D) 9.5 inches (H) 19.7 x (W) 12.1 x (D) 24.1 centimeters Weight: F1DS102P 1.5 lbs. (0.68kg.) F1DS104P 2.0 lbs. (0.91kg.) Operating Temp: 32° to 104° F (0° to 40° C) Storage Temp: -4° to 140° F (-20° to 60° C) Humidity: 0-80% RH, non-condensing Warranty: 5 years Part No.: F1DS102T, F1DS104T Power: By PS/2 keyboard port, USB port, or optional 9V DC, 600mA AC adapter with center pin positive polarity PCs Supported: 2 (F1DS102T) 4 (F1DS104T) Keyboard Emulation: USB and PS/2 Mouse Emulation: USB and PS/2 Monitor Supported: VGA and SVGA MultiSync, LCD (with use of adapter cable) Max Resolution: 2048X1536@85Hz Keyboard Input: 6-pin miniDIN (PS/2) Mouse Input: 6-pin miniDIN (PS/2) Audio Input/Output: 3.5mm jack Microphone Input/Output: 3.5mm jack VGA Port: 15-pin HDDB type LED Indicators: 2 (F1DS102T) 4 (F1DS104T) Enclosure: High-impact plastic Dimensions: F1DS102T (H) 6.75 x (W) 4.25 x (D) 7.75 inches (H) 17.2 x (W) 10.8 x (D) 19.7 centimeters F1DS104T (H) 7.75 x (W) 4.75 x (D) 9.5 inches (H) 19.7 x (W) 12.1 x (D) 24.1 centimeters Weight: F1DS102T 1.5 lbs. (0.68kg.) F1DS104T 2.0 lbs. (0.91kg.) Operating Temp: 32° to 104° F (0° to 40° C) Storage Temp: -4° to 140° F (-20° to 60° C) Humidity: 0-80% RH, non-condensing Warranty: 5 years Note: Specifications are subject to change without notice. 8 INSTALLATION Pre-Configuration Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor; the location of your CPUs from your console; and the length of the cables you use to connect your computers to the KVM Switch. Cable Distance Requirements For PS/2 computers: VGA signals are best retained when transmitted up to 25 feet (7.6m). Beyond 25 feet (7.6m), probability of video degradation increases with an increase in distance. For this reason, your PS/2 computer should be placed within 25 feet (7.6m) of the KVM Switch. Note: If your computer needs to be more than 25 feet (7.6m) from the KVM Switch, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using standard CAT5 UTP cable. For USB computers: USB signals can be transmitted up to 15 feet (4.6m) between the KVM and the CPU. Beyond 15 feet (4.6m), probability of signal failure is likely. Cautions and Warnings Avoid having cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners). 9