Beltronics BEL 990 Owner's Manual - Page 12
Entering Selectable Features Mode
View all Beltronics BEL 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Radar/Laser Digital Voice Prompts With "V o i c e ON", unit will provide Digital Voice prompts followed by "beeps" when X/K/Ka and Laser signals are detected. Factory setting is on. With "V o i c e OFF", unit will sound unique audio tones only. Factory setting is "V o i c e ON". Ka Narrow (33.4 +- 100 mhz) /Super Wideband Ka When "Ka S-Wid e " is selected, unit detects Super Wideband Ka signals and provides alarms at the 33.4 ghz to 36.0 range. When "K a narrw " is selected, unit detects Super Wideband Ka signals and alarms at 33.4 to 36.0 ghz) Safety Warning System® (sws™) When on, unit will provide a Text Message when signals from sws™ transmitters are detected. Factory setting is on. Note-sws™ signals are not common outside North America. Safety Warning System® (sws™) with Digital Voice Messages When "SWSv o i c e " is selected, unit will provide Digital Voice announcements when sws™ transmitters are detected. Factory setting is "SWSv o i c e ." When "SWSc l i c k " is selected, Digital Voice is replaced by "tone/clicking" only. Factory setting is "SWSv o i c e ". Audio/Visual Scroll Rate When "SCRLs l o w " is selected, unit will provide a slow cycling of audio/visual messages.When "SCRLf a s t " is selected, unit will provide a fast cycling of audio/visual messages. Factory setting is "SCRLf a s t " . Entering Selectable Features Mode 1. With the unit off, press and hold the cty button, then press the pwr button. The word "FEATURES" will appear in the display and a short audible "beep" will sound indicating you are now in the Selectable Features Mode. 2. Immediately after the "beep", the display will show the status of the first Selectable Feature (City X or City All).