Beltronics BEL 990 Owner's Manual - Page 14
Dash Mounting, Windshield Bracket Assembly, Windshield Mounting
View all Beltronics BEL 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Dash Mounting You can mount your unit to a level area of your vehicle's dash using the hook and loop fastener or the four non-skid dash mounting pads provided. Windshield Bracket Assembly The visor clip is fully assembled. To assemble the windshield bracket, follow this diagram. Windshield Bracket Assembly Windshield Mounting 1. Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2. Clean the selected windshield area, position the suction-cup mount on the windshield, and press firmly on each suction cup to secure it in place. 3. Use a screwdriver or a small coin to adjust the angle of the suction-cup mount until the base plate is level. 4. Slide detector onto base plate until it snaps into place. Note-some vehicles have a plastic coating on the inside of the windshield designed to protect occupants in case of an accident. Use of the windshield bracket on this type of windshield can permanently mark the surface. Check with your dealer if you are unsure whether your vehicle is equipped with this type of windshield.