Beltronics RX45 Owner's Manual - Page 4
Quick Reference Guide - beltronic
UPC - 065789277098
View all Beltronics RX45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Quick Reference Guide Power To turn the RX45 on or off, simply press the power button located on the far left side of the display controller. NOTE: We recommend wiring the RX45 to the vehicle's ignition switch so it turns on and off with the key. Volume Control/Mute Button To set your volume level for alerts, press and hold the V•MUTE button located in the center of the display controller. Once you've reached your desired level of audio, simply release the button.The RX45 will remember this setting even when power is turned off. To mute an audible alert,briefly press this button on the display controller to silence the audio for a specific alert. (The audio will alert you to the next encounter.) Page 7 AutoMute Beltronic's patented AutoMute automatically reduces the volume level of the audio alert. Page 7 If you prefer, you can turn AutoMute off. Page 12 Matrix Display RX45's display will show "Highway", "AutoScan," or "Auto NoX" as its standard power-on indication. Page 6 If you prefer, you can choose other power-on indications. Pages 8-10 During an alert, the display will indicate radar band, and a precise bar graph for the signal strength. Page 9 You can program the RX45 for ThreatDisplay mode, which displays multiple radar signals and their signal strength, or choose our new TechDisplay mode, which provides the actual numeric frequency of the radar signal. Pages 10-11 The display can also show Safety Radar text messages. Pages 22-23 BRT Button Press to adjust display brightness.There are three brightness settings, plus Dark Mode. In the Dark Mode RX45's display will remain dark and only the audio will alert you. Page 9 SENS Button The sensitivity button, (SENS) toggles between sensitivity modes including "AutoScan","Auto No X",and"Highway" settings. In general, we recommend the AutoScan mode. Page 7 Preferences RX45 is pre-programmed at the factory ready to go once it is installed - just turn it on. But you can also easily change 5 features for your preferences. Press both the BRT and SENS buttons to enter the Preferences, then easily Review or Change your settings. Pages 12-14 4 5