Beltronics Vector 985 Owner's Manual - Page 16

Entering Selectable Features Mode 1. With the unit OFF, press and hold the PWR and CTY buttons simultaneously. The word "FEATURES" will appear in the display, followed by the status of the first Selectable Feature. 2. Press the CTY button to move to the next Selectable Feature. To move backward in the list, press the DRK button. 3. Press the AUD button to make your selection. 4. Press the PWR button to exit Selectable Features mode. To confirm your unit is ready for operation, and what mode of travel your unit is operating, the display will read: "Au t o Sc a n ", "Hi g h w a y ", "Cit y X" or Cit y ALL. Installation k General Guidelines Do not mount your unit directly behind windshield wipers or mirrored sunscreens which block Radar and Laser signals and substantially reduce warning range. Unlike "after market" mirrored sun-screens, regular tinted glass does not affect Radar reception. Radar signals are also reflected by "heated windshields" known as Instaclear® and ElectriClear® available as an option on some vehicles. This type of windshield makes any dash, visor or windshield mounted detector ineffective. (If in doubt, check with an appropriate dealership to see if this applies to your vehicle.) To achieve optimum performance, regardless of which mounting position you choose, follow the basic steps on the following page. 14 Instaclear is a registered trademark of the Ford Motor Company. ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.