Beltronics Vector 985 Owner's Manual - Page 17

1. Consider occupant safety when selecting a mounting location. Choose a location where the unit will not be hazardous in case of an accident. 2. For optimum detection, position your unit with a clear, unobstructed view of the road from the front and rear. 3. Do not allow the unit to make contact with the windshield. This will eliminate unnecessary vibration. 4. Avoid placing your unit in direct sunlight. During the summer, interior temperatures of an enclosed vehicle can sometimes reach temperatures that will cause premature aging of the unit. 5. Your detector is not waterproof; exposure to water may cause damage and your warranty will be void. k Dash Mounting You can mount your unit to a level area of your vehicle's dash using the hook and loop fastener or the four, non-skid dash mounting pads provided. k Windshield Mounting 1. Remove the mounting cover on the top of the detector by pressing on the raised dots and pushing outward. 2. Insert the "grooved" cover plate supplied until it locks into place. 3. Clean the desired area of the windshield, and adhere the windshield/visor bracket by pressing on the suction cups. 4. Slide the detector onto the mounting bracket until it "locks" into place. 15