BenQ CP120 User Manual - Page 30
Utilizing the password function, To set a password
UPC - 840046012915
View all BenQ CP120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
The projector will also display its name, current wireless connection mode and channel in the lower part of the dialog. The default wireless connection mode is 802.11 b/g. The projector name is used to identify which projector to connect when you have multiple projectors available in the same location. If a wireless connection is detected, the Wireless Connection menu will display automatically. • For more information about wireless connection modes, channels and how to establish wireless connection between the projector and computer, please refer to "Using the wireless functions" on page 28. • The 802.11 a mode may not be available on the projectors sold in certain countries/areas due to local regulations. You can also press the Source (or SOURCE/WIRELESS) button to select your desired input signal manually. For more information, please refer to "Switching input signal" on page 26. If the frequency/ resolution of the input signal exceeds the projector's operating range, you will see the message "Out of Range" displayed on a blank screen. This message will remain on-screen until you change the input signal to an appropriate source. Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the on-screen menu. For details of the on-screen menu operation, please refer to "Using the menus" on page 37 for information. WARNING: You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print out this manual and write the password you used in this manual, and keep the manual in a safe place for later recall. To set a password CAUTION: Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Open the on-screen menu and go to the 3 or 4buttons. Setting > Password. Select On by pressing 2. When the function is activated for the first time, Password Setup a prompt will display on the screen. Use the 5 Enter Password 0 0 0 0 or 6 button to select a number for each digit of Press Auto to Confirm the password. Use the 3 or 4 button to move Press 5 or 6 to change number between the digits of the password. Press 3 or 4to move 3. When all digits are entered and the Password Setup password is ready, press the Auto (or Do you want to use 0 0 0 0 as your password? AUTO/CH.) button to confirm. A confirmation message displays. Yes Auto No 5 Cancel 6 • The password will display on-screen when being input. • IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 22 Using the projector