BenQ DC E41 User Manual - Page 11

Inserting an SD Memory Card, around and try again. - battery

Page 11 highlights

English BenQ DC 5530 User's Manual The Indicator LED at the top of the camera is orange while the camera is charging. When charging is complete, the LED turns off. Note • Use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect adapter is not covered under the warranty. • The battery may not begin charging immediately if it is too hot. In this case, let the cam- era cool before charging the battery. • When using the AC power adapter, the camera must be turned off in order to charge the battery. • When connected to a PC with the USB cable, the battery will charge if the camera is either on or off. 2.4 Inserting an SD Memory Card All images, movies, and sound clips taken by the camera can be stored in an SD (Secure Digital) memory card as well as in the camera's internal memory. Files stored on the SD card remain even if the camera's power is turned off. 1. Turn the camera off. 2. Slide the battery/SD card cover in the direction shown A and open the cover B . 3. Insert an SD card C : • The front side of the SD card (the side with the label) should be facing the front of the camera. • If the card does not slide into the slot, turn it around and try again. 4. Close the battery/SD card cover. SD A B OPEN SD Preparing Your DC E41 for Use C 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

BenQ DC 5530
User’s Manual
English
Preparing Your DC E41 for Use
7
The Indicator LED at the top of the camera is orange while the camera is charging. When
charging is complete, the LED turns off.
2.4
Inserting an SD Memory Card
All images, movies, and sound clips taken by the
camera can be stored in an SD (Secure Digital)
memory card as well as in the camera’s internal
memory. Files stored on the SD card remain even if
the camera’s power is turned off.
1.
Turn the camera off.
2.
Slide the battery/SD card cover in the direction
shown
and open the cover
.
3.
Insert an SD card
:
The front side of the SD card (the side with the
label) should be facing the front of the camera.
If the card does not slide into the slot, turn it
around and try again.
4.
Close the battery/SD card cover.
Note
Use only the AC power adapter specified for the camera. Damage caused by the use of an
incorrect adapter is not covered under the warranty.
The battery may not begin charging immediately if it is too hot. In this case, let the cam-
era cool before charging the battery.
When using the AC power adapter, the camera must be turned off in order to charge the
battery.
When connected to a PC with the USB cable, the battery will charge if the camera is
either on or off.
SD
OPEN
SD
A
B
C
A
B
C