BenQ GW2265HM GW2x6x Series User Manual - Page 10
Connect the PC video cable, To Connect the D-Sub Cable
View all BenQ GW2265HM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Gently attempt to pull them back apart to check that they have properly engaged. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. -5O ~ +20O 2. Connect the PC video cable Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. Either 10 How to assemble your monitor hardware