BenQ GW2265HM GW2x6x Series User Manual - Page 11
Connect the audio cable for models with, speakers., System, DisplayPort
View all BenQ GW2265HM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To Connect the DVI-D Cable Or Connect the plug of the DVI-D cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. To Connect the HDMI Cable Or Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. To Connect the DP Cable Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. If the image is not displayed, go to System, DisplayPort and change the setting to 1.1. And then connect the cable again. If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection. - Better quality: HDMI / DVI-D / DP - Good quality: D-Sub The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. 3. Connect the audio cable (for models with speakers). Connect the audio cable between the socket on the rear of the monitor (Line In) and your computer audio outlet. How to assemble your monitor hardware 11